AQUACAN tank 440 l + base + collector + connections - Anthracite Barrel specifications: - width - 82 cm - base diameter - 47 cm - top hole diameter - 33.5 cm - height - 130 cm - capacity - 440 l - material - plastic The tank is equipped with: - a top hole with a lid, - two places for attaching drain pipes from gutters - two threaded holes for a tap or a garden hose for a quick coupling. The tank comes with an assembly manual. The set includes: 1. Rainwater tank AQUACAN 440l - 1pc. 2. Water collector, rainwater drain chute - ICANS1 - 1 set 3. Stainless Screw Clamp 12-22mm Bradas - 1pc 4. Rain shower faucet CANTAP ITAP1 - 1pc 5. Set of connections for connecting a garden hose with a valve - 1 set, which includes: a) a connector with a valve and a 3/4'' thread - 1pc. b) connection with external thread 3/4" - 1pc. c) 1/2" quick coupling - 1pc. 6. Base for IBAS rain showers - 1 pc. 7.Teflon tape 12mm x 0.075mm 10mm (12/2400) - 1pc 8. Tap tube 3/4 length 30cm - 1pc. The ICANS gutter water collector is the perfect complement to your rain shower. Easy to install, it allows you to collect water from the gutter in a very easy way. Suitable for gutters with a diameter of 80 to 120 mm. The set includes: 1. Hole saw for making holes in the gutter and rain shower 2. Rain shower gasket 3. Reducer connecting hose to gasket 4. Hose connecting the gutter to the rain shower - 50 cm 5. Reducer connecting the hose to the water collector 6. Gutter Water Collector Assembly Instructions: - Step 1. Install the hole saw (1) in the drill - step 2. Make a hole in the rain shower, the location of the hole should be consistent with the embossing on the side wall of the barrel - step 3. Place the barrel by the gutter and measure the place where the hole was made. The hole in the gutter should be 80 to 90 mm above the hole made in the rain shower - step 4. Make a hole in the gutter - step 5. Insert the reducer (3) into the hose (4), put the gasket (2) on the reducer and slide the whole thing into the hole in the rain shower - step 6. Slide the second reducer(5) into the hose (4), the rubber water collector (6) must be fitted to the reducer. Squeeze the collector and slide it into the hole in the gutter Base specifications: - top diameter - 47 cm - base diameter - 50 cm - height - 22 cm - material - plastic - weight - 1.65 kg It is resistant to mechanical damage, thanks to a special coating it does not fade under the influence of the sun. Other accessories 1. 3/4 Inlet Valve Rain Drain Faucet - Garden Inlet Valve with Hose Tip. - Thread 3/4" - Hose end diameter 16 mm - Material: Polypropylene - Weight 0.03 kg 2. 1/2" RAMP Quick Connector The quick connector allows you to easily and quickly connect a hose (1/2",5/8") to a faucet, sprinkler gun or other device via a connection or connector. The whole is made of high-quality non-slip material. 3. Coupler, valve with 3/4'' RAMP thread (RT1121) Connection for 3/4" faucet with valve. The fastener allows you to easily connect two threaded components