Manufacturer's code: 10021283 The Stamos Soldering laboratory power supply is suitable for supplying external devices with direct current. It is designed for professional use in the industrial sector, laboratories, telecommunications, workshops and research institutes. The linear technology ensures low residual ripple and low noise levels. The large LED display allows you to easily read the set values of output voltage, current and power. Four memory locations allow you to easily recall frequently repeated values. The device is operated using knobs and buttons. The voltage is regulated from 0 to 60 V DC and the current from 0 to 20 A. The values can be controlled on the large LED display, easily adjusting them to your needs. The power supply also has a control panel lock to prevent accidental changes to the set parameters. If the power supply acts as a constant voltage (CV) source, the device automatically switches to constant current (CA) mode as soon as the set load limit is reached. This prevents damage to the connected devices. The power supply is equipped with Surge Protection (OVP), Overcurrent Protection (OCP), Overload Protection (OPP), Current Limitation and Special Overheat Protection (OTP). The fan provides it with adequate cooling. Non-slip rubber feet ensure a safe position of the device and protect the surface from scratches. Product Features: - 0-60V and 0-20A adjustable, - 4-digit LED display, - 4 memory locations and interface with Modbus protocol for connection with PC, - Built-in protection against overheating, overcurrent, overvoltage, over-load, - Intelligent temperature control and automatic change from constant current to constant voltage. Technical parameters: - Part number - 10021283 - Item condition - New - Model - S-LS-104 - Current stability - CC ≤ 0.25% FS - Connector [mm] - 4 - Cooling - Fan - Current control range [A] - 0-20 - Display accuracy - Voltage: 10 mV; current: 10 mA - Color - Gray - Current - 0-20 - DC voltage control range [V] - 0-60 - Fuse [A] - 10 - Insulation resistance [MΩ] - ≤ 100 - Voltage stabilization coefficient - CV: ≤ 0.5% ; CC: ≤ 0.5% - Current stabilization factor - CV: ≤ 0.5% FS; CC: ≤ 0.5% FS - Operating humidity [%] - ≤ 80 - Output current [A] - 20 - Protection - OVP, OCP, OTP, OPP - Power cord [m] - 1.5 - Output voltage [V] - 60 - Resolution - 4-digit LED display / 10 mV / 10 mA - Display - LED - Relative allowable operating and storage humidity [%] - ≤ 80 - Accuracy of parameter settings (25deg; C ±5deg; C) - ± 1% FS ± 1 - Voltage [V] - 230 - Power [W] - 1200 - Power [W] - 1,200 - Voltage Rise/Dip/Current Response Time (at 10% load) [ms] - 400 - Rated Input Current [A] - 6.8 - Ripple - ≤ 1% - Voltage Range [V] - 0-60 - Storage Temperature [deg; C] - -20 - +85 - Voltage Stability - CV ≤ 0.5% FS - Storage Humidity - ≤ 80% - Dimensions (LxWxH) - 23 x 32 x 16 cm - Weight - 5 kg Included: - Laboratory Power Supply - User Manual