Baseus Telescopic Gravity Car Window Mount Dashboard Brand: Baseus Mounting: Glass or Splitter Board Compatibility: devices with a width of 65mm to 85mm and a thickness of no more than 1cm (including the thickness of the phone case) Additional Features: Automatic Jaws, 360 Degree Rotation Gravity Car Mount, which takes care of the safety of our phone first. A special triangular design guarantees it exceptional stability while driving, and the gently bent jaws do not allow it to fall out even under hard braking. In addition, thanks to the auto-lock function, the gadget is extremely simple to use. It is enough to put the phone on it so that the arms close by themselves. The accessory is made of high-quality materials and is designed to be mounted on the windshield or dashboard of the car. It has a strong suction cup that can be used repeatedly. Just rinse it with water to regain its grip. In addition, there are high adjustment options (including 360-degree rotation) and a cutout that allows you to connect a charger. Full automatism No cumbersome adjustment of the accessory to the size of the phone . Just put the device on it and the jaws will close automatically. It couldn't be easier! Telescopic arm The length of the arm is adjustable thanks to the telescopic design. Stability and safety The triangular design of the accessory guarantees stability and safety of the phone even on the most rough roads. 360° Motion Head The handle has a 360° movable head. Thanks to it, we can adjust the position of our device. Too much rotation may cause the device to fall out of the holder. Do not place the handle horizontally, as this will eliminate the pressure on the lower trapdoor and the device may also fall out. Premium Underlay The two-stage washer allows you to adapt to the right surface. One mode is ideal for flat surfaces. The second is intended for rough surfaces. To attach the bracket to the windshield, place it against it and press the side "latch". When installing the mount on the dashboard, leave the latch upright.