Manufacturer number: MSW 10060665 A powerful winch from the German brand MSW created for pulling vehicles or other objects out of difficult areas. It will work well in mountainous places or when driving off-road. It fits perfectly for large, heavy vehicles, trailers, boats or snowplows. It can also be used on households or in forestry when, for example, removing tree trunks or logs. The 1.3 hp (1000 W) motor, together with a large drum and a strong steel rope, achieves a pulling force of 4500 lbs (2040 kg). This allows you to quickly and easily extract the vehicle from a ditch or other terrain obstacle. The three-stage planetary gearbox (forward and reverse and manual clutch for fast rope unwinding) allows you to adjust the power transmission by means of a special gearbox. The reduction ratio is 153:1. On the other hand, an intermittent duty cycle allows the engine to operate on an interval basis, so that it does not reach the highest temperature. To increase the durability of the device, a steel rope (15 m long / 5.5 mm in diameter) is included, which, thanks to the four-track guide, is resistant to most mechanical damage, even when the angle of retraction is frequently changed. An automatic braking system is responsible for safety, which will keep the object being pulled out even if there is a lack of electricity. In addition, the design of the winch is resistant to overloads and rain, snow or dirt. Product features: - Efficiency - 1000 W motor generates a pulling force of up to 2040 kg, - Speed - 5.4 m/min pull, - Precision - Three-speed gearbox with a reduction ratio of 153:1, - Durability - strong galvanized steel rope, - Safety - overheating, overload protection and automatic braking system, - Convenience - two remote controls (wireless and wired) and moisture and dirt resistant design. Technical parameters: - Model - PROPULLATOR 4500-A - Part number - 10060665 - Item condition - New - Housing material - Aluminum - Rope material - Steel - Motor power - 1.6 hp / 1200 W - Voltage - 12 V - Motor type - Permanent magnet motor - Duty cycle - Intermittent - Gearbox - 3-stage planetary gear - Gear ratio - 153:1 - Pulling force - 2040 kg / 4500 lbs - Pulling speed - 5.4 m/min - Rope length - 15 m - Rope diameter - 5.5 mm - Rope protection system - 4-stage guide - Drum diameter - 41 mm - Braking system - Automatic - Clutch type - Slip ring - Remote control type - 1 x wired / 1 x wireless - Wireless remote control range - 30 m - Block - 1 x 4 t - Mounting plate included - Yes - Dimensions (LxWxH) - 17.5 x 33 x 13 cm - Weight - 10.5 kg - Shipping dimensions (LxWxH) - 42 x 28 x 17 cm - Shipping weight - 14 kg Included: - Winch, - Control box with wires, - Wired remote control, - Wireless remote control - 4-track roller rope guide, - Hook, - Mounting accessories, - Manual PL.