Manufacturer code: 10062133 The MSW wire rope hoist allows you to effortlessly lift and move heavy loads in a warehouse or workshop. It's ideal for professional use in factories, industries, recycling plants, shipyards, or anywhere large loads need to be moved. It's suitable for steel beams 68-110 mm wide. The 1600 W motor lifts loads up to 500 kg to a height of 12 m. The lifting speed is 8 m/min. The 12 m long, 5.6 mm diameter steel rope withstands even heavy use. The crane can also be used on curved beams, as long as the radius of the curve is at least 1 m. The crane travels at a speed of 0.96 km/h. By installing a block, the lifting height is reduced by half to 6 m and the lifting speed is 4 m/min. At the same time, the load capacity increases to 1000 kg. The device therefore has twice the load capacity when used with a pulley. The included remote control allows for remote control. For safety, the device stops in the event of a power outage. The device has an IP54 protection class and is resistant to dirt and water. Product features: - 1600 W motor moves the load and is controlled by a remote control, - Load capacity up to 1000 kg, - Lifts loads at a speed of 8 m/min, - High-quality steel cable with a length of 12 m, - Ideal for warehouses, garages, workshops, hangars, etc. Technical parameters: - Catalog number - 10062133 - Article condition - New - Model - MSW-PROCAT-1000NW - Material - Aluminum, Steel, Copper - Color - Blue - Voltage [V] - 230 - IP protection class - IP54 - Power [W] - 1600 - Maximum forward speed [km/h] - 0.96 - Motor power [W] - 1600 - Work break time - S3 / 25% / 10 min - Maximum lifting speed - 8 m/min - Load capacity - 500 kg - Rope length - 12 m - Maximum load - 1000 kg - Maximum lifting height - 12 m - Rope diameter - 5.6 mm - Lifting speed - without pulley - 8 m/min - Load capacity - without pulley - 500 kg - Minimum curve radius - 1 m - Lifting speed - with pulley - 4 m/min - Load capacity - with pulley - 1000 kg - Maximum lifting capacity - without pulley - 12 m - Maximum lifting capacity - with pulley - 6 m - Load hook - Yes - Remote control - Yes - Emergency stop - Yes - Pulley with hook - Yes - Clamp - attachment to profile or swing arm - Yes - Dimensions (LxWxH) - 50 x 17 x 28 cm - Weight - 44.6 kg - Shipping dimensions (LxWxH) - 91 x 65 x 47 cm - Shipping weight - 46.7 kg Included in the set: - Winch with gantry - Pilot