AQUACAN tank 360 l + connections, base - Terracotta Barrel specification: top width - 70 cm top length - 80 cm base diameter - 44 cm top hole diameter - 25 cm height - 120 cm capacity - 360 l material - plastic The tank comes with assembly instructions. The set includes: 1. Rainwater tank AQUACAN 360l - 1pc. 2. Water collector, rainwater drain chute - ICANS1 - 1 set 3. Stainless Screw Clamp 12-22mm Bradas - 1pc 4. Rain shower faucet CANTAP ITAP1 - 1pc 5. Set of connections for connecting a garden hose with a valve - 1 set, which includes: a) a connector with a valve and a 3/4'' thread - 1pc. b) connection with external thread 3/4" - 1pc. c) 1/2" quick coupling - 1pc. 6. Base for IBAS rain showers - 1 pc. 7.Teflon tape 12mm x 0.075mm 10mm (12/2400) - 1pc 8. Tap tube 3/4 length 30cm - 1pc. 9.End cap, cap for ICANS1 diameter 40mm - 1pc Base specification: top diameter - 47 cm base diameter - 50 cm height - 22 cm material - plastic weight - 1.65 kg It is resistant to mechanical damage, thanks to a special coating it does not fade under the influence of the sun. The ICANS gutter water collector is the perfect complement to your rain shower. Easy to install, it allows you to collect water from the gutter in a very easy way. Suitable for gutters with a diameter of 80 to 120 mm. The set includes: 1. Hole saw for making holes in the gutter and rain shower 2. Rain shower gasket 3. Reducer connecting hose to gasket 4. Hose connecting the gutter to the rain shower - 50 cm 5. Reducer connecting the hose to the water collector 6. Gutter Water Collector Assembly Instructions: Step 1. Install the hole saw (1) in the drill step 2. Make a hole in the rain shower, the location of the hole should be according to the embossing on the side wall of the barrel step 3. Place the barrel by the gutter and measure the place where the hole was made. The hole in the gutter should be between 80 and 90 mm above the hole made in the rain shower step 4. Make a hole in the gutter step 5. Slide the reducer (3) into the hose (4), put the gasket (2) on the reducer and slide the whole thing into the hole in the rain shower step 6. Slide the second reducer(5) into the hose (4), the rubber water collector (6) must be fitted to the reducer. Squeeze the collector and slide it into the hole in the chute Other accessories 1. 3/4 Inlet Valve Rain Shower Drain Faucet Garden Inlet Valve with Hose Tip. Thread 3/4" Hose Tip Diameter 16mm Material: Polypropylene Weight 0.03kg 2. 1/2" RAMP Quick Connector The quick connector allows you to easily and quickly connect a hose (1/2",5/8") to a faucet, sprinkler gun or other device via a connection or connector. The whole is made of high-quality non-slip material. 3. Coupler, valve with 3/4'' RAMP thread (RT1121) Connection for 3/4" faucet with valve. The connector allows you to easily connect two components with a 3/4" thread. The built-in valve allows you to cut off the water supply. It can be used, for example, for rainwater tanks. Female thread 3/4" male thread male thread 3/4" ball valve length 50mm 4. Connection with external thread 3/4" RAMP - R1115 Screwed into a device (e.g. sprinkler) or other element with internal thread allows it to be connected to a hose terminated with a quick connector. external thread 3/4" length 37 mm complete with gasket weight 0.007 And what about the tank in winter? Just unhook the hose from the gutter and plug it with a plug as in the photos below. A 30 cm long hose is attached to the tap, which makes it easy to pour water into the watering can. Invest in the environment and get up to 80% return on investment. Climate change forces us to rationally manage nature's goods. Programs such as My Water or Catch Rainwater are aimed at protecting water resources by retaining rainwater and using it for everyday household chores. Last year alone, PLN 100 million was invested in the My Water program. The National Fund for Environmental Protection and Water Management is responsible for the implementation of the My Water program, and in addition, city and commune offices are launching their own projects related to the purchase of a rainwater tank. Check if this type of funding is currently being implemented in your area! Basic information about co-financing: Each project has individual requirements and conditions for recovering money - check in the project what the minimum capacity of the tank is. The amount of return depends on the capacity of the tank. The purchase of the tank should be made after signing the subsidy agreement. An invoice is required for settlement. More information is available on the website of the National Fund for Environmental Protection and Water Management or on the websites of cities and municipalities.