ICANSET 6 Connection Kit, for Rain Shower (ICANS6) ICANSET 6 Connection Kit. A connection system that draws and transfers water to a rainwater tank. The set consists of 6 elements: - 2x reducer - garden hose length 60 cm - water catcher - gasket - hole saw for making holes in the tank and gutter A very versatile product. Its simple design ensures quick installation and allows for easy installation without much interference with the gutter. It can also be used with MAUZER tanks. - minimum gutter diameter: 9 cm - maximum gutter diameter: 11.5 cm Installation of the collector does not require cutting the gutter. Place the collecting element in the gutter after making a hole, using the hole saw included in the set. Assembly instructions: - Install the hole saw in the drill - Make a hole in the rain shower, the hole location should be consistent with the embossing on the side wall of the barrel - Place the barrel against the gutter and measure the hole where the hole was made. The hole in the gutter should be 80 to 90 mm above the hole in the rain shower - Make a hole in the gutter - Slide the regulator into the hose, put a gasket on the regulator and slide the whole thing into the hole in the rain shower - Insert the second regulator into the hose, put a rubber water collector on the regulator. - Squeeze the collector and slide it into the hole in the gutter