Gutter water collector for rain shower - ICANS3 The ICANS gutter water collector is the perfect complement to your rain shower. Easy to install, it allows you to collect water from the gutter in a very easy way. Suitable for gutters with a diameter of 80 to 120 mm. The set includes: 1. Gasket for rain shower 2. Reducer connecting the hose to the gasket 3. Reducer connecting the hose to the water collector 4. Gutter water collector Proper execution of the connection allows you to obtain the "overflow" function as well. When the barrel is filled with water above the level of the hole in the gutter, the water will stop flowing into the rain barrel. Thanks to this, rainwater will never spill over the rain shower cap. Detailed instructions on the package. Installation instructions: - step 1. Install the hole saw (1) in the drill - step 2. Make a hole in the rain shower, the location of the hole should be consistent with the embossing on the side wall of the barrel - step 3. Place the barrel by the gutter and measure the place where the hole was made. The hole in the gutter should be 80 to 90 mm above the hole made in the rain shower - step 4. Make a hole in the gutter - step 5. Insert the reducer (3) into the hose (4), put the gasket (2) on the reducer and slide the whole thing into the hole in the rain shower - step 6. Slide the second reducer(5) into the hose (4), the rubber water collector (6) must be fitted to the reducer. Squeeze the collector and slide it into the hole in the gutter Proper execution of the connection also allows you to obtain the "overflow" function. When the barrel is filled with water above the level of the hole in the gutter, the water will stop flowing into the rain barrel. Thanks to this, rainwater will never spill over the rain shower cap. At another of our auctions, you can buy a suction and discharge hose by the meter.