Product code: 1009357 The MSW magnetic drill, thanks to its design, allows for work in difficult conditions and in various positions, such as vertically. This is possible thanks to a powerful 18,000 N electromagnet that keeps the device stable. The relatively low weight and long power cord (2 m) allow for easy placement. A 1300 W motor ensures efficient operation, allowing for drilling at speeds up to 600 rpm. A three-part rotating handle controls the drilling depth (up to 50 mm). This moves the movable tool along a guide within a range of 0 mm to 175 mm. The drill is equipped with a cooling system to reduce the temperature of the drill bit during operation. It consists of a 300 ml reservoir and a 50 cm long tube. This improves efficiency when machining metal components and extends the life of the drill bit. Easy operation is achieved thanks to large buttons located on one side of the drill. These allow you to start the motor and electromagnet and select the drilling direction. There's also a stepless speed control knob. A built-in spirit level ensures the machine maintains the correct angle. Safe operation is ensured by an RCD magnetic circuit breaker, which protects against electric shock and accidental activation. Included fuses protect the electrical circuit from overload. A lockout feature prevents the drill from starting when the electromagnet is off. Product features: - Efficiency - 1300W motor, drilling speed up to 600 rpm, - Easy to use - easy-to-read control panel, convenient drilling depth adjustment, and stepless drilling speed, - Durability - steel and aluminum construction, - Safety - powerful electromagnet, RCD, securing strap, lockout to prevent accidental activation, - Mobility - small size and weight compared to similar products, long power cable. Technical parameters: - Model - MSW-MD32-ECO - Catalog number - 10060431 - Material - Die-cast aluminum - Power - 1300 W - Voltage - 230 V - Cooling tank capacity - 300 ml - Cooling tank tube length - 50 cm - Maximum electromagnetic attraction - 18000 N - Tap diameter - M14 - Core drill diameter - 35 mm - Maximum drilling depth - 50 mm - Drill diameter - 19 mm - Drill chuck - B16 / 1.5-13 mm - Maximum rotational speed (no load) - 600 rpm - Guide range - 0-175 mm - Built-in spirit level - Yes - Safety strap included - Yes - Threading function - Yes - Power cord length - 2.25 m - Dimensions (LxWxH) - 31 x 21.5 x 56.5 cm - Weight - 16.8 kg - Shipping dimensions (LxWxH) - 41 x 41 x 18 cm - Shipping weight - 18 kg Included in the set: - Magnetic drill - Safety strap - Rotary handle - 3 pieces - Allen key - 2 pcs - Fuse - 2 pcs - Wedge punch - Cooling tank - Drill chuck holder - Drill chuck (B16 / 1.5-13 mm) - Drill key - Carbon brush - 2 pcs