Manufacturer number: MSW 10060433 The MSW magnetic drill, thanks to its design, will allow you to work in difficult conditions and in various positions, e.g. vertically. This is made possible by a powerful 18000 N electromagnet that keeps the device in a stable position. Relatively low weight and a long power cord (2 m) make it possible to place the drill anywhere. Efficient operation of the device is ensured by a 1680 W motor, which allows drilling at a speed of up to 370 revolutions per minute. The drilling depth (up to 50 mm) is set by a three-part swivel chuck. It moves the moving piece of equipment along the guide in the range from 0 mm to 165 mm. A cooling system is installed in the drill to reduce the temperature of the drill during operation. It consists of a 300 ml tank and a 50 cm long tube. This affects the efficiency when machining metal components and extends the life of the drill bit. Easy operation of the equipment is due to large buttons located on one side of the drill. Thanks to them, you can start the motor and solenoid and choose the direction of drilling. There is also a stepless knob for speed adjustment. The proper maintenance of the angle of the machine is ensured by a built-in spirit level. Safe use is ensured by the magnetic circuit breaker (RCD), which protects against shock and accidental switch-on. The included fuses will protect the electrical circuit from overload. In addition, a lock has been used to prevent the drill from starting when the solenoid is switched off. Product features: - Performance - 1680 W motor, drilling speed up to 370 rpm, - Easy operation - buttons located on one side, adjustable drilling depth and direction of rotation, - Durability - optimized cooling system, - Safety - strong solenoid, RCD switch, fastening belt, lock against unwanted switching, - Mobility - small size and weight compared to similar products, long power cable. Technical parameters: - Model - MSW-MD60-ECO - Part number - 10060433 - Material - Die-cast aluminum - Power - 1680 W - Voltage - 230 V - Cooling tank capacity - 300 ml - Cooling tank tube length - 50 cm - Maximum electromagnetic attraction - 18000 N - Tap diameter - M25 - Core drill bit diameter - 60 mm - Maximum drilling depth - 50 mm - Drill diameter - 28 mm - Drill chuck - B18 / 3-16 mm - Maximum rotational speed (no load) - 370 rpm - Guide Reach - 0-165 mm - Safety Strap Included - Yes - Threading Function - Yes - Power Cord Length - 2.2 m - Dimensions (LxWxH) - 32 x 22 x 56.5 cm - Weight - 16.32 kg - Shipping Dimensions (LxWxH) - 38 x 47 x 17 cm - Shipping Weight - 18.5 kg Included: - Magnetic Drill - Safety Strap - Swivel Handle - 3 Pieces - Allen Wrench - Fuse - 2 pcs - Wedge punch - Cooling tank - Drill chuck holder - Drill chuck (B18 / 3-16 mm) - Drill wrench - Carbon brush - 2 pcs.