Specifications: Dimensions: 430x200x290mm Operating temperature range: 60~200°C Handle material: bakelite Cover: protective control panel Capacity : 6 L Type: single chamber Housing material: stainless steel Weight: 4.5 kg Voltage: 220-240 V a.c. Power: 2000 W Handle: covers, for hanging the basket Digital control panel: no Frequency: 50-60 Hz Electrical insulation class: I Automatic power on / Power off: yes Overheating protection: yes Temperature control: yes Time setting (timer): no Beep: no Lid material: stainless steel Basket dimensions: 220x130x100 mm Safety switch: yes Splash proof switch: yes Removable heater: yes Cold zone: yes Min. oil level: 2.5 l Max. oil level: 3.5 l Drain tap: no 1-CHAMBER FRYER 3.5L The YATO fryer is an indispensable device in almost every catering point. It is designed for deep-frying: French fries, meat, fish, croquettes, vegetables. The fryer tank has a total inlet capacity of 6L. On the other hand, the minimum oil level is 2.5L and the maximum is 3.5L. The 2.0kW heater is controlled by a potentiometer located on the control panel. It is possible to set the operating temperature in the range of 60~200?. The installed splash-proof switch allows you to turn off the device, without having to disconnect the power cable from the mains. In addition, the control panel has a protective cover made of very durable polycarbonate, which protects the panel from splashing oil during frying. This makes it much easier to keep the fryer clean. The removable heater can be hung on a special handle in the position where the dripping oil goes back to the tank. The fryer has an additional safety device that automatically turns off the heater when it is pulled out of the tank. Additional protection protects it from overheating, at temperatures above 260°. A particularly useful feature of YATO fryers is the use of the so-called "cold zone", i.e. a detachment between the heater and the bottom of the tank. This function takes advantage of the phenomenon where the heat generated by the heater rises upwards to heat the oil. On the other hand, under the heater, the temperature of the oil is lower. Thanks to this, crumbs and food residues falling to the bottom of the tank are stored in oil at a lower temperature and do not burn. Both the housing and the lid of the fryer are made of high-quality stainless steel. This makes the fryer quick to clean and clean. The YATO fryer has a very durable basket measuring 220x130x100mm, which has a plastic, non-heating handle. On the other hand, special hooks allow the basket to be hung directly above the tank, minimizing the risk of oil splashing on the worktop. This significantly increases the cleanliness of the workstation and minimizes the time needed for cleaning. The fryer, powered by electricity with a voltage of 230V~50Hz, has dimensions of 430x200x290mm and weighs 4.5kg. **