HYBRID blister wipers ADVANTAGES: Strong pressure on the glass – high efficiency of removing water and impurities. A combination of quiet operation with a robust design. Long service life, resistance to mechanical damage and corrosion Very simple and convenient installation thanks to the available adapters. They fit 95% of models. HOW TO USE: Step 1 Lift the wiper arm and cover the windshield Move the wiper arm away from the windshield. You will do this by pulling your arm to an upright position. To make sure that the wiper arm does not damage the windshield during the replacement, cover it with an old towel, blanket or cardboard. Step 2 Disassemble the old wiper Now it's time to remove the old wiper. The most popular adapters are those with the "U" system, which slides out of the arm without major problems. Tilt the adapter lock and slide off the old wiper blade. Step 3 Choose the right adapter My Auto Virage HYBRID wipers include as many as 9 different adapters, so you can fit them into 95% of car models. Before you install new blades, you need to choose your adapter and put it on the new wipers. Sliding and putting on is done in no time. Step 4 Install new wipers Slide the new wiper blade onto your shoulder, press until you hear a characteristic click. This will mean that the adapter has jumped into position and the wiper is firmly holding on to the arm. Step 5 Lower your arm with a new windshield wiper Once you have replaced the wiper, remove the protection from the windshield and lower the arm. Now repeat the action with the second wiper, and finally do the test of the new feathers and you will be ready to go!