Manufacturer name: S-PLASMA 125H The plasma cutter from the German welding market leader STAMOS GERMANY is able to achieve a maximum cutting current of 125 A. This will enable efficient processing of materials such as steel, nickel, aluminum, copper and other electrically conductive metals. Thanks to this, the equipment will be used in many industries that require precisely cut metal elements. The device uses advanced IGBT technology. It uses special bipolar transistors with an isolated gate to ensure reliability. Fast parameter switching and low risk of short circuit are guaranteed by a three-phase semiconductor element. IGBT also affects the small size of the device, while maintaining high parameters. Product features: - Functionality - for cutting steel and other electrically conductive metals (titanium, copper, brass, etc.) - Efficiency - modern IGBT technology and non-contact arc ignition ensure smooth and stable operation, - Simple operation - large knob and switches allow for precise setting of operating parameters without the need to take off gloves, - Legibility - the LED display presents the current even in dark rooms, and the LEDs indicate that the current is too high voltage or drop in air pressure, - Easy transport - comfortable handle, small size and weight allow you to easily move the cutter as needed, - Convenience - long 5 and 4-meter cables guarantee freedom of movement during cutting and make it easier to work in hard-to-reach places, - Safety - a special overheating protection system and a built-in fan that guarantees heat dissipation, STAMOS devices are made according to strict European standards and have passed CE and RoHS compliance tests. This guarantees a long service life and high quality of the device. Technical parameters: - Model - S-PLASMA 125H - Part number - 2067 - Item condition - New - Rated input voltage - 400 V, 3-phase - Mains frequency - 50 / 60 Hz - Rated input current - 22 A - Maximum input current - 31 A - Rated input power - 15.4 kVA - Maximum input power - 21.8 kVA - Idle voltage - 300 V - Cutting current - 10 - 125 A - Rated duty cycle - 60% - Duty cycle cutting current 100% - 96.8 A - Duty cycle cutting current 60% - 125 A - Gas Post-Flow Time - 2, 10, 60 s - Housing cooling - Fan - Handle cooling method - Air - Ground cable length - 3 m - Plasma handle length - 5 m - Air hose length - 4 m - Power cord length - 3.8 m - Maximum thickness of cut material - 34 mm - Cutting width - 1.4 mm - Required airflow - 250 l/min - Air pressure - 7 bar - Insulation class - F - Degree of protection - IP21S - Design in accordance with - EN 60974-1; EN 60974-10 - EG Compliance - CE - Dimensions (LxWxH) - 63.5 x 27 x 40 cm - Weight - 33.9 kg - Shipping Dimensions (LxWxH) - 74 x 38 x 52 cm - Shipping Weight - 34.8 kg Working Methods: Plasma Cutting - thanks to the current up to 125 A, the device can easily cut through metals such as iron, stainless steel, cast iron, copper or aluminum. The air pressure is infinitely adjustable, allowing for precise control of the plasma stream. No burning through, low distortion and a smooth cutting gap are some of the advantages of using the Stamos Germany multifunction machine. Functions of the device: - 2T/4T, i.e. two-stroke and four-stroke. When using the former, pressing the button will initiate the cut, and releasing it will interrupt the process. In the case of a four-stroke, the user does not have to hold the buttons all the time, because pressing and releasing the button starts or ends the work, - Non-contact ignition of the plasma arc allows you to start cutting without contact with the workpiece, which reduces wear and tear on consumable parts and improves work efficiency, - Gas Post-Flow Time, i.e. gas flow regulation. Prevents oxidation of the weld, Included: - Plasma cutter - Plasma chuck with hose – 5 m - Consumables of the plasma chuck - Ground hose with clamp – 4 m - Air hose – 4 m - Pressure reducer - Pressure gauge - Manual EN