Manufacturer's name: S-PLASMA 85H. This plasma cutter from the German welding market leader STAMOS GERMANY is capable of achieving a maximum cutting current of 85 A. This enables efficient processing of materials such as steel, nickel, aluminum, copper, and other electrically conductive metals. This makes the device suitable for use in numerous industries requiring precisely cut metal components. The device employs advanced IGBT technology. It utilizes special insulated-gate bipolar transistors (BITs) for reliability. A three-phase semiconductor element ensures fast parameter switching and a low risk of short circuits. The IGBT also contributes to the device's small size while maintaining high performance. Product Features: - Functionality - for cutting steel and other electrically conductive metals (titanium, copper, brass, etc.) - Efficiency - modern IGBT technology and contactless arc ignition ensure smooth and stable operation - Simple operation - large knobs allow for precise cutting current adjustment without the need to remove gloves - Readability - LED display shows current intensity even in dark rooms - Easy transport - comfortable handle, small size, and weight allow for easy portability of the cutter as needed - Convenience - long 5- and 4-meter cables ensure freedom of movement during cutting and facilitate work in hard-to-reach places - Safety - a special overheating protection system and a built-in fan ensure heat dissipation STAMOS devices are manufactured according to strict European standards and have been tested for CE and RoHS compliance. This guarantees long life and high quality of the device. Technical parameters: - Model - S-PLASMA 85H - Catalog number - 2044 - Article condition - New - Rated input voltage - 400 V, 3-Phase - Mains frequency - 50 Hz - Rated input current - 13.2 A - Maximum input current - 18.6 A - Rated input power - 8.6 kVA - Maximum input power - 13.2 kVA - Open circuit voltage - 280 V - Cutting current - 20 - 85 A - Rated duty cycle - 60% - Cutting current at 100% duty cycle - 65.8 A - Cutting current at 60% duty cycle - 85 A - Gas flow time - 2 – 15 s - Maximum cutting thickness - 27 mm - Cutting width - 1.2 mm - Required air flow - 175 l/min - Working air pressure - 5.5 bar - Plasma torch - 5 m - Ground cable with clamp - 4 m - Air nozzle - 4 m - Power cable - 3.8 m - Housing cooling - Fan - Torch cooling method - Air - Power factor - 0.93 - Efficiency (at rated conditions) - ≥ 0.85 - Insulation class - F - Design in accordance with - EN 60974-1 / EN 60974-10 - EG compliance - CE - Degree of protection - IP20 s - Dimensions (LxWxH) - 55 x 37 x 21 cm - Weight - 20.1 kg - Shipping dimensions (LxWxH) - 65 x 36.5 x 44 cm - Shipping weight - 27.6 kg Working methods: Plasma cutting - thanks to the current intensity of up to 85 A, the device will easily cut such metals such as iron, stainless steel, cast iron, copper, and aluminum. Air pressure is infinitely adjustable, allowing for precise control of the plasma jet. No material burn-through, minimal distortion, and a smooth cutting kerf are just some of the advantages of using the multifunctional Stamos Germany device. Device functions: - 2T/4T, i.e., two-stroke and four-stroke. When using the first, pressing the button initiates cutting, while releasing it interrupts the process. With the four-stroke mode, the user does not need to hold the buttons continuously, as pressing and releasing the button starts or stops the process. - Contactless plasma arc ignition allows cutting to begin without contact with the workpiece, reducing wear and tear on consumables and improving work efficiency. - Gas Post-Flow Time, i.e., gas flow regulation. Prevents weld oxidation. Set includes: - S-PLASMA 85H cutter - Cutting handle with cable - 5 m - Ground cable with clamp - 4 m - Air nozzle - 4 m - Pressure regulator - Manometer - Components for plasma handle - PL instruction