Manufacturer's name: S-MIGMA 250.IGBT. This multifunctional semi-automatic welding machine from Stamos Germany allows you to process metal parts, thanks to its ability to operate in MIG, MAG, FCAW, TIG, and MMA modes. The S-MIGMA 250.IGBT, thanks to its infinitely variable welding current regulation (max 250 A), allows you to precisely determine the correct value, which increases work comfort. The welder utilizes modern IGBT inverter technology. This guarantees a high degree of reliability, as well as efficient operation and quick switching between functions. This is thanks to a three-pin semiconductor element that is short-circuit resistant. Product Features: - Versatility - allows for welding in MIG, MAG, FCAW, TIG, and MMA modes, - Practicality - suitable for processing components made of various weldable metals, - Efficiency - the use of modern IGBT technology guarantees precise operation and short-circuit protection, - Convenience - stepless knobs allow for precise adjustment of inductance, welding current, and wire feed speed, - Mobility - a comfortable handle and small size make the welder easy to carry, STAMOS devices are manufactured according to strict European standards and have been tested for CE and RoHS compliance. This guarantees long life and high quality of the device. Technical parameters: - Model - S-MIGMA 250.IGBT - Catalog number - 2208 - Article condition - New - Power supply - 230 V / 50 Hz - Rated input current - MIG 29.5 A / MMA 33 A / TIG 22.5 A - Maximum input current - MIG 38 A / MMA 43 A / TIG 29 A - Open circuit voltage - 62 V - MIG current - 50 – 250 A - MMA current - 10 – 250 A - TIG current - 10 – 250 A - Welding current at 60% duty cycle - 250 A (MIG/MMA/TIG) - Welding current at 100% duty cycle - 193 A (MIG/MMA/TIG) - Duty cycle - 60% - Welding thickness - 0.5 – 10 mm - TIG electrode diameter - 0.5 – 4 mm - MMA electrode diameter - 1.6 – 5 mm - Cooling - Fan - Gun cooling - Gas - Hot Start - Yes - Wire feeder - 2.5 – 13 m/min - Cable with MMA torch - 1.4 m - Ground cable - 1.3 m - Cable with MIG torch - 1.75 m - Cable with TIG torch - 3.7 m - Safety class - IP21 - Insulation class - F - Dimensions (LxWxH) - 54.00 x 24.00 x 41.00 cm - Weight - 15.00 kg - Shipping dimensions (LxWxH) - 64.00 x 34.50 x 44.50 cm - Shipping weight - 27.05 kg Working methods: MIG/MAG - Using the MIG method you can conveniently For joining stainless steel, tin, copper, and other non-ferrous metals, the MAG MMA (covered electrode) mode is ideal for welding low-alloy, high-alloy, or structural unalloyed steels. It works well indoors and outdoors. It does not require a shielding gas and is suitable for welding thin materials (from 1.5 mm thick), such as copper, iron, nickel, aluminum, or alloys, including steel and cast iron. Welds made with this method have good operational and mechanical properties. TIG – performs well at joining metals and their alloys, such as copper, aluminum, magnesium, nickel, titanium, steel, and many others. It is particularly effective when processing very thin materials (from 0.5 mm thick). This method can be used in any position – horizontal, vertical, flat, and overhead, and results in a clean, precise, corrosion-resistant weld. FCAW (flux-cored arc welding) – a method that doesn't require the use of shielding gas. This makes it ideal for outdoor work in windy locations. This mode is characterized by deep penetration. Features: - Hot Start temporarily increases the welding current during arc ignition. - Spatter automatically sets the inductance, allowing for stable welding. The set includes: - S-MIGMA 250.IGBT welding machine - MIG torch - TIG torch - MMA cable - Ground cable with earth clamp - 0.8 mm wire – 5 kg spool - Polarity change cable - Long cap - 2, 2.4, and 3.4 mm collets - Collet in housing - 3 ceramic nozzles - 2 MIG electrodes - Collar - Polish manual