Manufacturer code: 10090182 The Hillvert soil moisture sensor is perfect for monitoring soil moisture levels so your automatic irrigation system controller can stop watering when it's too wet. The device fits most irrigation controllers, especially Hillvert models with catalog numbers 10090184, 10090187, and 10090188. The meter allows you to set one of three soil moisture levels (25%, 45%, and 60%). When the actual soil moisture level is higher than the set value, the sensor sends a signal to the controller to stop the irrigation cycle. The measurement is taken every 60 seconds. The cable connecting to the controller is weather-resistant. LED indicators make operation easy. The desired moisture level is selected by pressing the appropriate button, which is indicated by the LED lighting up. If no changes are made within a minute, the LED will turn off, saving the setting. Product features: - Versatility - three different humidity levels - 25%, 45%, 60%, - Efficiency - water saving and protection of plants against excessive watering, - Precision - measurement taken every 60 seconds, - Durability - resistant to weather conditions, also suitable for outdoor use, - Easy to use - three buttons and LEDs indicating settings. Technical parameters: - Model - HT-IRI-02 - Manufacturer code - 10090182 - Product condition - New - Power cable [m] - 5 - Material - PP - Watering duration adjustment - N/A - Output plug - Mini-jack socket - Time setting [min] - N/A - Operating mode - S = 25%, M = 45%, L = 60% (volume indicator) - Watering frequency adjustment - N/A - Power source - 2 x AA 3 V - Thread - N/A - IP protection rating - IP66 - Frequency of periodic measurements [s] - 60 - Dimensions (LxWxH) [cm] - 10 x 8 x 13 - Weight [kg] - 0.2 - Shipping dimensions (LxWxH) [cm] - 11 x 9 x 15 - Shipping weight [kg] - 0.22 Included: - Soil moisture sensor - User manual