Tempered glass with a revolutionary installation method - if you have been scared of this aspect by using tempered glass, your problems have just been solved!

Tempered glass Glas.TR EZ Fit from the Spigen brand has been protected by a mounting frame perfectly cut to the front of the device, thanks to which you can position them on the screen in a perfect way. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Glas.TR EZ Fit is a 0.2mm thick coating, which has been hardened to a hardness of 9H during the production and hardening process. This makes it scratch-resistant even in contact with objects as sharp as keys or a knife. The glass is covered with an oleophobic and hydrophobic layer, which prevents fingerprints or other impurities from leaving on the screen. It is crystal clear and perfectly reflects the displayed colors. It also has no effect on touch sensitivity and has exceptional smoothness, making it a pleasure to guide your finger across the screen. Glass is dedicated in particular to protect the screen from scratches and minimizes the risk of damage to the screen during an unexpected fall.

The glass/film is cut only to the flat part of the display with an emphasized structure, in accordance with and on the basis of a die-cut prepared by the manufacturer of a given phone model. Only such a cut of the film/glass will ensure complete compatibility with our protective accessories.

Due to the variety of milling of the display edges, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

Installation instructions:

1. Start the installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Clean thoroughly and degrease the surface of the screen, and then use a dry cloth to polish it to a shine.
3. Put a bezel with unsealed glass on the front of the watch.
4. Remove the bezel along with the protective film. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Make it so that the adhesive layer bonds to the screen as tightly as possible.

Specification:

• 100% Original
• Packed in original packaging
• Extremely easy to install thanks to mounting frame|
• Hardness 9H
• Milled edges 2.5D pleasant to the touch
• Extra layer of olephobic layer
• Perfect clarity
• Does not affect touch functionality

Kit includes:
2x Spigen Glas.TR EZ Fit1x Installation kit