Manufacturer's code: 10060178 The Hillvert submersible pump easily pumps water from deep and narrow shafts, wells, tanks or cisterns. The stainless steel housing has a diameter of only 70 mm and is ideal for narrow boreholes. The 250 W motor operates at a speed of 2850 rpm and provides a high flow rate of up to 3800 l/h. The device can be submerged to a depth of 20 m with a maximum lifting height of 28 m. The well pump is suitable for clean water with a temperature of up to 35deg; C - just right for water supply. Product features: - Fast pumping - capacity of 3800 l/h thanks to a 250 W motor and a speed of 2850 rpm, - Convenient operation - control via control box with protected on/off switch, - Wide range of applications - maximum lifting height of 28 m, - You place the device flexibly - thanks to the long power cord and the maximum immersion depth of 20 m, - High durability - corrosion and dirt-resistant stainless steel housing. Technical parameters: - Part number - 10060178 - Item condition - New - Overall diameter - 70mm / 2.75'' - Filter - Yes - Insulation class - B - IEC protection class - I - Color - Silver - Number of stages (pump impellers) - 8 - Max. depth of immersion under water - 20 m - Max. sand content in water [%] - 0.25 - Maximum number of starts per hour - 50 h - Maximum input power - 0.75 kW - Maximum output power - 0.25 kW - Maximum water temperature - 35 deg; C - Maximum Lifting Height - 28 m - Maximum Operating Pressure - 2.6 Bar - Maximum Water Flow - 3.8 m³/h - Maximum Particle Size - 1.8 mm - Material - Stainless Steel - Control Methods - External Jump Box (250 W) - Voltage [V] - 230 - Rated Current - 2.5 A - Rated Speed [rpm] - 2850 - Water Flow - 3800 l/h - Overcurrent - Yes - Power Cord - 20 m - Cable Specification - HO7RN-F3G0.5mm² - IP Protection - IP68 - Hole Diameter Mounting Valve - 80 mm - Water Connection Diameter - 1.25 in - Check Valve - Yes - Weight - 8.75 kg - Shipping Weight - 10.4 kg Included: - Submersible Pump - Manual EN