Product code: 1033946 Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. Product Features: - 100% Original - Packed in original packaging - Hardness 9H - Cut to the flat part of the display - Milled edges 2.5D pleasant to the touch - Extra oleophobic layer - Perfect transparency - Does not affect touch functionality - Dimensions: 145 x 67 mm Assembly instructions: 1) Start installation in the bathroom right after bathing - water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible. Due to the various milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the milling of the screen in a given piece. Technical parameters: - Brand - Tech-Protect - Model - Tech-Protect Glass Fit+ - Compatibility - iPhone 16 Pro / 17 Pro Included: - 2 x Tech-Protect Glass Fit+ - 2 x Installation Kit