Manufacturer's code: 10030793 The Steinberg Systems rope winch is suitable for lifting heavy loads in a warehouse, garage or workshop. The 1050W motor can lift loads of up to 300kg to a height of up to 18m. The lifting speed is 8 m/min. The heavy-duty steel rope is torsion-proof and wear-resistant. The inserted block reduces the lifting height by half, to 6 m, and the lifting speed is reduced by half, to 4 m/min. At the same time, the load on the winch increases to 600 kg and allows heavy loads to be lifted. The tensile force is twice as high when a disc is applied. A wired remote control controls the winch, the emergency switch stops the rope. Each of the hooks has a safety lock. The appliance switches off automatically in the highest and lowest positions. The hoist housing is made of steel that is resistant to scratches, chips and corrosion. The equipment has an IP54 protection class, i.e. protection against the ingress of dirt and water and thermal protection against overload. Product features: - Pulling force up to 600 kg, - Solid steel rope with a diameter of 4.5 mm, - Lifting height 18 m, with a block of 6 m, - Emergency stop and hooks with safety locks, - Steel and copper construction. Technical parameters: - Model - SBS-EH-600/18 - Part number - 10030793 - Item condition - New - Voltage [V] - 230 - Chain diameter [mm] - 4,5 - Material - Steel, copper - Permissible load [kg] - 600 - Maximum load [kg] - 600 - Motor power [W] - 1050 - Rope diameter [mm] - 4,5 - Rope material - Steel - IP protection class - IP54 - Lifting speed - without block [m/min] - 8 - Load capacity - without block [kg] - 300 - Lifting speed - with block [m/min] - 4 - Load capacity - with block [kg] block [kg] - 600 - max. lifting capacity - without block [m] - 18 - Max. lifting capacity - with block [m] - 6 - Load hook - Yes - Emergency stop switch - Yes - Dimensions (LxWxH) [cm] - 45 x 27 x 15 - Weight [kg] - 20.3 - Shipping dimensions (LxWxH) [cm] - 48 x 36.5 x 31 - Shipping weight [kg] - 21.2 Included: - Rope winch - User manual